Oppo F27 Pro+ alternatives
Tap above to see alternatives.
Samsung Galaxy A55 alternatives
Tap above to see alternatives.
Oppo F27 Pro+
Oppo F27 Pro+
-
Dimensity 7050
6 nm
-
5000 mAh
67W
-
6.7"
1080x2412 pixels
-
64 MP
4K@30fps
- Specs
Samsung Galaxy A55
Samsung Galaxy A55
-
Exynos 1480
4 nm
-
5000 mAh
25W
-
6.6"
1080 x 2340 pixels
-
50 MP
4K@30fps
-
Specs
2x2.6 GHz Cortex-A78
6x2.0 GHz Cortex-A55
4x2.75 GHz Cortex-A78
4x2.0 GHz Cortex-A55
8GB 256GB (UFS 3.1)
8GB 256GB (UFS 3.1)
12GB 256GB (UFS 3.1)
(f/1.7, (wide), 1/2.0", 0.7µm, PDAF)
2 MP
(f/2.4, (macro))
f/1.8, (wide), 1/1.56", 1.0µm, PDAF, OIS
12 MP
f/2.2, 123˚ (ultrawide), 1/3.06", 1.12µm
5 MP
f/2.4, (macro)
1080p@30/60/120/480fps
720p@960fps
1080p@30/60fps
(f/2.0, (wide))
f/2.2, 26mm (wide), 1/2.74", 0.8µm
1080p@30fps
1080p@30/60fps
SIM1: Nano, SIM2: Nano
SIM1: Nano, SIM2: Nano (Hybrid)
7 5G bands
n1, n3, n5, n8, n28, n77, n78
12 5G bands
n1, n3, n5, n7, n8, n26, n28, n40, n41, n66, n77, n78
In this performance comparison, the Samsung Galaxy A55 with its Exynos 1480 (4nm) performs better than the Oppo F27 Pro+ with the Mediatek Dimensity 7050 (6nm), thanks to superior chipset efficiency.
Samsung Galaxy A55 launched with Android 14 and will receive updates until Android 18, whereas Oppo F27 Pro+ launched with Android 14 and will get Android 17. Samsung Galaxy A55 will get security updates until 2029 (approx. 5 years), while Oppo F27 Pro+ is supported till 2028.
Both Oppo F27 Pro+ and Samsung Galaxy A55 feature AMOLED displays, offering vibrant colors and deeper blacks. Both smartphones offer the same 120 Hz refresh rate. Samsung Galaxy A55 also boasts a brighter screen with 1000 nits of peak brightness, enhancing outdoor visibility. Both phones have the same screen resolution.
Both phones are equipped with the same 5000 mAh battery capacity. Oppo F27 Pro+ also supports faster wired charging at 67W, compared to 25W on Samsung Galaxy A55.
Oppo F27 Pro+ offers better protection against water and dust with an IP69 rating.
¹ Scores can vary even with the same chipset due to RAM, thermals, and software optimization.