Realme P1 Speed alternatives
Tap above to see alternatives.
Samsung Galaxy A34 alternatives
Tap above to see alternatives.
Realme P1 Speed
Realme P1 Speed
-
Dimensity 7300 Energy
4 nm
-
5000 mAh
45W
-
6.67"
1080 x 2400 pixels
-
50 MP
4K@30fps
- Specs
Samsung Galaxy A34
Samsung Galaxy A34
-
Dimensity 1080
6 nm
-
5000 mAh
25W
-
6.6"
1080 x 2340 pixels
-
48 MP
4K@30fps
- Specs
4x2.5 GHz Cortex-A78
4x2.0 GHz Cortex-A55
12GB 256GB (UFS 3.1)
8GB 128GB (UFS 2.2)
f/1.8, 27mm (wide), 1/1.95", PDAF
2 MP
f/2.4, (depth)
Auxiliary lens (flicker sensor)
f/1.8, 26mm (wide), 1/2.0", 0.8µm, PDAF, OIS
8 MP
f/2.2, 123˚, (ultrawide), 1/4.0", 1.12µm
5 MP
f/2.4, (macro)
1080p@30/60/120fps
1080p@30/60fps
720p@480fps
f/2.4, 24mm (wide), 1/3.0"
f/2.2, (wide), 1/3.1", 1.12µm
1080p@30fps
SIM1: Nano, SIM2: Nano
SIM1: Nano, SIM2: Nano
9 5G bands
n1, n3, n5, n8, n28, n40, n41, n77, n78
9 5G bands
n1, n3, n7, n8, n28, n40, n41, n77, n78
In this performance comparison, the Realme P1 Speed with its Mediatek Dimensity 7300 Energy (4nm) performs better than the Samsung Galaxy A34 with the Mediatek Dimensity 1080 (6nm), thanks to superior chipset efficiency.
Samsung Galaxy A34 launched with Android 13 and will receive updates until Android 17, whereas Realme P1 Speed launched with Android 14 and will get Android 16. Samsung Galaxy A34 will get security updates until 2028 (approx. 5 years), while Realme P1 Speed is supported till 2027.
Both Realme P1 Speed and Samsung Galaxy A34 feature AMOLED displays, offering vibrant colors and deeper blacks. Both smartphones offer the same 120 Hz refresh rate. Realme P1 Speed also boasts a brighter screen with 2000 nits of peak brightness, enhancing outdoor visibility. Both phones have the same screen resolution.
Both phones are equipped with the same 5000 mAh battery capacity. Realme P1 Speed also supports faster wired charging at 45W, compared to 25W on Samsung Galaxy A34.
Samsung Galaxy A34 offers better protection against water and dust with an IP67 rating.
¹ Scores can vary even with the same chipset due to RAM, thermals, and software optimization.